Front Wing Spar

January 5th, 2018, 2h

Worked on the tie down assembly:

  • Grinned the brackets to size, since we only needed to remove about amm.
  • Drilled matching hole with the main front spar.

We were not able to go ahead with the fabrication of the spacers wince we needed a blade for cutting metal for the bandsaw, so I ordered one to follow up on this work next time.


December 29th and 30th 2018, 16h

We started on the front wing spar, we worked on the plate nuts on the sides of the spar, for both wings:

  • counter sinking the side holes for the rivets
  • priming the holes
  • riveting the plate nuts
  • countersinking for the screws

Left wing



Right wing



We dimpled the access plates


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s