August 4th & 9th, 15h
Next in the wing light topic is the landing light installation. The landing lights get installed in the landing light board using screws and springs, so that we can easily adjust orientation as desired.
Next was cutting the wing tips to install the lights. We did a series of small cuts using a Dremel, to ensure that we only remove the minimum while having ease of installation of the light boards. We did all the composite work of all the 4 wing tips in the same time. We also did some small adjustments to the boards, sanding some some sections of the edges, to allow for ease of installation.
rv7plane.wordpress.com 